About Track Numbers - Sharp MD-MT16H Operation Manual

ABOUT TRACK NUMBERS

When recording, track numbers will be
created automatically.
(Auto marker function/Synchro marker
function)
When recording from analogue inputs:
(Including digital inputs other than CDs
or MiniDiscs)
A new track number will automatically be
created whenever 1 second or more of
silence occurs in the source.
(Auto marker function)
Playback
side
First
track
Recording
side
If there is some noise in the "silent"
spaces from the source, the track
numbers may not be created at the
correct position, depending on the
contents of the source being recorded.
You can also record a series of tracks
without using the auto marker function.
* MD-MT16H FOR UK(01-21)
When recording from digital inputs:
(CDs/MiniDiscs only)
Track numbers will be created automatically
for each track at the same point where track
numbers already exist on the CD or
MiniDisc.
(Synchro marker function)
About 1
second
Recording
Silence
side
Second
track
20
21
First track Second track
Playback
Track A Track B
side
First track Second track
Track A Track B
The track numbers on the playback
side may not match the track numbers
recorded on the MiniDisc.
When recording, if a programmed
playback is performed by the source
or playback is performed by selecting
tracks manually, the MiniDisc track
numbers may not be the same as on
the source.
The track numbers can also be changed
after recording.
Track numbers may not be created,
even when recording from digital inputs,
depending on the CD player used for the
source.
99.4.2, 0:57 PM
Third track
Track C
Third track
Track C