Playing A Minidisc - Sharp MD-S301 Operation Manual

PLAYING A MINIDISC

Headphones
To the
For the
left (L)
For the
Remote
right (R)
control unit
1
Insert the headphones plug firmly into
the headphones jack on the remote
control unit.
2
Plug the remote control unit into the
jack on the main unit. Push the plug
all the way in.
Since the remote control unit plug has
only one correct orientation, plug it in as
shown in the drawing.
3
Load a MiniDisc in the direction indi-
cated by the arrow on the MiniDisc, with
the label side facing up. (Insert the Mini-
Disc firmly, until a click is heard.)
The power will be turned on automat-
ically, and playback will start from the
first track. (Auto-play function)
When track names are included on the
MiniDisc, the track names will be scrolled.
Track number
After playback of the last track has fin-
ished, the unit will stop automatically.
jack
BASS
4
Press the VOLUME + button to in-
crease the volume and the VOLUME –
button to decrease the volume.
(0 - 30)
5
Adjust the bass level.
Each time the BASS button is pressed,
the tone will be switched as follows:
BASS 1
BASS 2
BASS 3
BASS 0
The most recent volume or bass set-
tings are saved when the power is
turned off.
Note:
Whenever any button is pressed, the
remote control display will light for
about 4 seconds.
8
Bass is emphasized a little.
Bass is emphasized more.
Bass is emphasized still
more.
Bass emphasis is canceled.
MD-S301