Table of Contents
Advertisement
PLAY MODE
To cancel the auto-play
function
(Remote control)
When a MiniDisc is inserted, the power will
be turned on automatically, and playback
will begin. You can cancel automatic play-
back.
1
While in the stop mode ...
Hold down the PLAY MODE button
until "SET UP" appears.
When you release the button, "BEEP 1"
5
4
or "BEEP 0" will appear.
2
Press the
or
button until "auto
PL" appears.
3
Press the PLAY MODE button.
"PL off" will appear, and the auto-play
function will be canceled.
To restore the auto-play function, se-
lect "auto PL".
4
Press the
button.
The normal display will reappear.
To cancel the auto power
save function
(Remote control)
Power consumption can be reduced by
controlling the memory storage time. You
can cancel the auto power save function.
1
While in the stop mode ...
Hold down the PLAY MODE button
until "SET UP" appears.
When you release the button, "BEEP 1"
5
4
or "BEEP 0" will appear.
2
Press the
or
button until the
"auto PS" appears.
3
Press the PLAY MODE button.
"PS off" will appear, and the auto power
save function will be canceled.
To restore the auto power save func-
tion, select "auto PS".
4
Press the
button.
The normal display will reappear.
About the sound skip guard memory:
During playback, approximately 10 sec-
onds of information is stored in the semi-
conductor memory. Therefore, even when
the pickup cannot read information for a
second or two due to an external shock,
the sound will continue without interruption
because the information stored in memory
is used.
About the auto power save function:
This is a function used to save power when
using the unit with the rechargeable bat-
tery or the alkaline battery. While in the
auto power save mode, 5 - 10 seconds of
sound information is stored in memory.
When the unit is used in places exposed
to excessive vibration, cancel the auto
power save function. When the auto power
save function is disabled, 10 seconds of
sound information is always stored in
memory. (When the AC adaptor or a car
adaptor is used, the information storage
time is always 10 seconds, regardless of
the auto power save mode.)
15
MD-S301
Advertisement
Table of Contents
