Table of Contents
Advertisement
Opti
MODEL: TM430 / TM431 / TM432
AC: 100 – 240VAC
0.23A @ 100Vac / 0.15A @ 240Vac
DC: 0.8A
1 x 12V
+
-
STD / AGM-MF / GEL / CYCLIC CELL
2.5 - 50Ah
MODEL: TM450 / TM451 / 452
AC: 100 – 240VAC
0.46A @ 100Vac / 0.30A @ 240Vac
DC: 2 x 0.8A
2 x 12V
+
-
STD / AGM-MF / GEL / CYCLIC CELL
2.5 - 50Ah
MODEL: TM454 / TM455 / 456
AC: 100 – 240VAC
0.92A @ 100Vac / 0.60A @ 240Vac
DC: 4 x 0.8A
4 x 12V
+
-
STD / AGM-MF / GEL / CYCLIC CELL
2.5 - 50Ah
50-60Hz
12V
50-60Hz
12V (independent)
50-60Hz
12V (independent)
3
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D'EMPLOI
IMPORTANT: à lire avant
d'utiliser l'appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig
voor gebruik
ISTRUZIONI PER L'USO
IMPORTANTE: da leggere prima
di utilizzare l'apparecchio
INSTRUKTIONER
VIKTIGT: läs följande
fullständiga instruktioner
för användningen innan du
använder laddaren
Advertisement
Table of Contents
Related Manuals for TecMate Optimate 3 TM430
Summary of Contents for TecMate Optimate 3 TM430
- Page 1 Opti INSTRUCTIONS FOR USE IMPORTANT: Read completely MODEL: TM430 / TM431 / TM432 before charging AC: 100 – 240VAC 50-60Hz MODE D’EMPLOI 0.23A @ 100Vac / 0.15A @ 240Vac IMPORTANT: à lire avant DC: 0.8A d’utiliser l’appareil 1 x 12V STD / AGM-MF / GEL / CYCLIC CELL MODO DE EMPLEO 2.5 - 50Ah...
- Page 2 Multi bank / station models OptiMate 3 x2 OptiMate 3 x4: LED #1 - AC POWER (100-240V) LED #2 - Reverse polarity LED #3 - SAVE/DESULPHATE LED #4 - CHARGE LED #5 - GREEN: TEST & MAINTAIN LED #6 - RED: TEST & MAINTAIN...
- Page 3 Opti THIS PORTION OF THE MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS FOR THE OPTIMATE 3 BATTERY CHARGER. IT IS OF THE UTMOST IMPORTANCE THAT EACH TIME, BEFORE USING THE CHARGER, YOU READ AND EXACTLY FOLLOW THESE INSTRUCTIONS. SAVE THESE INSTRUCTIONS. DO NOT USE FOR NiCd, NiMH, Li-Ion OR NON-RECHARGEABLE BATTERIES. 1.
- Page 4 a) If necessary to remove battery from vehicle to charge,always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc. b) Be sure area around battery is well ventilated while battery is being charged. Gas can be forcefully blown away by using a piece of cardboard or other non-metallic material as a fan.
- Page 5 Opti DO NOT USE FOR NiCd, NiMH, Li-Ion OR NON-RECHARGEABLE BATTERIES. IMPORTANT: READ THE FOLLOWING INSTRUCTIONS BEFORE USING THE CHARGER Disconnect AC power supply before making or breaking DC/battery connections. Battery acid is highly corrosive. Wear protective clothing and eyewear and avoid contact.
- Page 6 A battery left deep-discharged for an extended period may develop permanent damage in one or more cells. Such batteries may heat up excessively during high current charging. Monitor the battery temperature during the first hour, then hourly there-after. Check for unusual signs, such as bubbling or leaking electrolyte, heightened activity in one cell compared to others, or hissing sounds.
- Page 7 TecMate (International) SA, Sint-Truidensesteenweg 252, B-3300 Tienen, Belgium, makes this limited warranty to the original purchaser at retail of this product. This limited warranty is not transferable. TecMate (International) warrants this battery charger for three years from date of purchase at retail against defective material or workmanship. If such should occur the unit will be repaired or replaced at the option of the manufacturer.
Need help?
Do you have a question about the Optimate 3 TM430 and is the answer not in the manual?
Questions and answers