Oi19 - Curtis Gemini 12D Series User Manual

OPERATING INSTRUCTIONS
Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
NOTICE - Do not use IntelliFresh
The Gemini Brewer is factory preset for optimal performance.
1 The brewer should be ON.
switch. The READY TO BREW
light should be on.
4 Fill with the proper amount
of ground coffee. Level the
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE section.
To turn the warmer on manually, press the WARMER button. Press the WARMER button repeatedly to change the
temperature or to turn it off completely. The warmer timer shuts off the warmer automatically after and extended
period of time. See the PROGRAMMING GUIDE section to set the auto shut-off timer.
®
satellites on non-IntelliFresh brewers.
2 Place an empty satellite
under the brew basket. Make
sure it is pushed all the way
back against the front cover.
5
into the brew rails under the
control panel. Slide it all the
way back until it stops.
3
the brew basket.
6 Press the BREW button.
Brewing will begin immediately.
When brewing starts,
the warmer will come on
automatically.

OI19