Canon Multi-PDL Printer Kit-E1 Service Manual page 59

Chapter 2
driver, etc., such as paper supply/output, the number of copies and finishing information.
When the processing is completed and all documents are output, the documents and job
information stored in the image server are deleted.
e) Operations for Secured Print jobs
Like other print jobs, Secured Print jobs can be deleted, interrupted, restarted and promoted
by operating from the status screen of the print job. Regarding these operations, the device
side does not distinguish from operations of the normal PDL job. That is, the password entry
is required only when the job is output. If you interrupt or restart the job during outputting,
the password setting and matching are not conducted.
f) Automatically delete of Secured Print Jobs
When Secured Print Job is continuing being suspended for a long time, apparatus deletes a
job automatically.
There are options for automatic job deletion time -- 1, 2, 3, 6, 12, and 24 hours. With a view
of security and memory usage, no option longer than 1 day is available. The elapsed time
starts after all the processes for the PDL data and the rendering for all the image data, for
which Secured Print is specified, are finished.
g) Specifications and Limitations on Secured Print Jobs
The limitations on Secured Print jobs are listed as follows.
- Once data of a Secured Print job is printed, it is immediately deleted and cannot be printed
any more.
- If the power for the controller is shut down, unprinted data of a Secured Print job is deleted
from the printer.
- All the job information, represented by the paper source and output information,
information of the number of copies, and finishing information, cannot be changed on the
printer.
- If the entire raster information for a Secured Print job cannot be stored in the image server
(hard disk drive) due to insufficient memory, the job results in an error, to be deleted.
2-7