Canon Multi-PDL Printer Kit-E1 Service Manual page 49

Chapter 1
do so, see the instructions on registering user-defined paper sizes for individual operating
systems.
When an area-specific paper size is manually set up under [Form to Tray Assignment] of
the driver UI, or if the size obtained by running dynamic configuration happens to be an
area-specific paper size, the driver operates in the corresponding mode. After performing
all associated internal operations, the driver runs a check of area-specific paper sizes stored
as user defined paper sizes, and handles any matching paper as a default paper size (special
paper ID) instead of as a user-defined paper size. Moreover, the driver permits registration
of multiple area-specific paper sizes, treating them as a separate paper group. The driver UI
handles them using specifications designed for LTR paper, permitting the use of finisher
functions, which were previously offered for user-defined paper sizes (except the use of the
middle binding function). Although it will permit all settings, the printer unit may ignore
some of the settings. (The printer driver will simply ignore them, not issuing conflicts.)
Paper size
Govermment Letter
Govermment Legal
Foolscap
Australian Foolscap
Oficio
Folio
Ecuadorian Oficio
Aegentine Oficio
Argentine Letter
Bolivian Oficio
Mexican Oficio
Supported Paper Types:
1-6
T-1-5
G_LTR
G_LBL
FLSP
A_FLSP
OFI
FOLIO
E_OFI
A_OFI
A_LTR
B_OFI
M_OFI
Dimensions
Feed
Direction
267.0
330.0
330.0
337.0
317.0
330.0
320.0
340.0
220.0
355.0
341.0
Width
203.0
267.0
216.0
206.0
216.0
210.0
220.0
220.0
280.0
216.0
216.0