Sector Alarm PhoneWatch TC User Manual page 3

Easy-to-use alarm system
The following will give you information about the most important
functions of your alarm.
Full Arm mode (arms the entire alarm system)
Press the button Full Arm mode and enter your personal code or
place the keytag over the keytag reader symbol on the keypad.
Press the button Full Arm mode on the remote control.
Part Arm mode (arms part of the alarm system*)
Press the button Part Arm mode and enter your personal code
or place the keytag over the ketyag reader symbol on the keypad.
Press the button Part Arm mode on the remote control.
Disarm the alarm system:
Enter your personal code or place the keytag over the keytag reader symbol on the
keypad.
Press the Disarm button on the remote control.
* Part Arm mode is programmed according to your needs. Your PhoneWatch Engineer can
program the alarm according to your preferences.
EASY-TO-USE ALARM SYSTEM 3