Parts Names And Functions - Zojirushi CV-TYQ40 Operating Instructions Manual

CV-TYQ_0405_E_20180314

PARTS NAMES AND FUNCTIONS

A rattling sound you may
hear when opening or
closing the Upper Lid or
when boiling is normal.
(see P.19)
Inner Lid
Water Removal Area
Drain water here.
●
Inner Container
Control Panel
Spout
Hot water dispenses from here.
●
Water Level Gauge
Water Level Ball
(Red Ball)
The Water Level Ball is not
●
seen when the water level is
higher than the scale of
Water Level Gauge.
REFILL Line
Fill water above the line.
●
REFILL Line
Water Level Ball
Filter
For care and use instructions,
●
see pg.15.
Power Cord
Power Plug
Cord
4
Lid Lock
Steam Vent
Exercise care during the boiling
●
process as steam emitting from
Upper Lid
the Steam Vent is very hot.
Inner Lid Gasket
(Consumable Part)
If the Inner Lid Gasket hardens, changes
●
shape, turns white, or otherwise
becomes worn out, please replace it with
a new one. (Separate charge required.)
(see pg.16)
Not doing so may cause hot water to
leak when the product is tilted or tipped
over, resulting in scalding. Steam leaking
from the gap may also cause burns or
product failures.
Hinge
Maximum Water
Level Line
仮
Handle
Body
Receptacle
Appliance Plug
●
inserts here.
Swivel Base
Do not let the Power Cord wrap
●
around the Main Body when turning.
Appliance Plug
Please remove the twist tie holding the
●
Power Cord before use.
Do not use the Power Cord bundled up.
●
Doing so may cause the Power Cord to
Twist Tie
become excessively hot, resulting in
malfunction.
CONTROL PANEL
Press buttons down firmly.
●
The Sound Signals and raised dot (
●
DISPENSE button is provided for those with visual impairment.
DISPENSE button
Press to dispense hot water. (see pg.8, 14)
QUICK TEMP light
BOIL light
REBOIL /
QUICK TEMP
button
Starts the Reboil
mode. (see pg.9)
Sets the Quick Temp
mode. (see pg.12)
Use to return to the original
temperature setting when
Energy-Saving mode is
selected. (see P.14)
Also used when performing the
Citric Acid Cleaning (to initiate
cleaning, press this button for more
than 3 seconds). (see pg.16)
TEMP SET button
Sets the Keep Warm temperature.
(see pg.10-11)
NOTE: Illustration is for reference only. Actual display will not
KEEP WARM light
show all functions simultaneously during use.
How to Open/Close the Upper Lid
To Open
Press the indented area of the
1
Lid Lock with your thumb.
Pull the Lid Lock up with your
2
fingers to open the Upper Lid.
To Close
Depress the Upper Lid until it
clicks shut.
1
2
Indented Area of
the Lid Lock
Lid Lock
) in the center of the
●
CAFÉ DRIP light
UNLOCK light
UNLOCK button
This button must be pressed to
dispense hot water. (see pg.8)
Press this button again for Café
Drip Function.
(see pg.14)
ENERGY-SAVING/
TIMER button
Use when setting the
Energy-Saving mode or
Energy-Saving Timer function.
(see P.12-13)
Display
LCD display shows the water
temperature and Timer settings.
How to Detach/Attach the Upper Lid
To Detach
Open the Upper Lid to about
1
a 45-degree angle.
Push the Upper Lid Detach
2
button.
Pull the Upper Lid forward
3
and up at an angle.
To Attach
Push the Upper Lid back into
place at the same angle.
1
3
About 45
degrees
Upper Lid
Detach button
2
Push
5