Sharp PN-T321 Operation Manual page 27

Others
Function
SCREEN SIZE
(DVI-D, D-SUB)
SCREEN SIZE
(HDMI, COMPONENT, VIDEO)
VOLUME
MUTE
INFORMATION MODEL
SERIAL NO
BRIGHT
TEMPERATURE SENSOR
TEMPERATURE ACQUISITION
CAUSE OF LAST STANDBY MODE
Command Direction Parameter
WIDE WR 1-5
WIDE WR 1-5
VOLM WR 0-31
MUTE WR 0-1
INF1 R
SRNO R
VLMP WR 0-31
DSTA R
ERRT R
STCA W 0
R
Controlling the Monitor with a PC (RS-232C)
Reply Control/Response contents
1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2
1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot
0-31
0-1 0: OFF, 1: ON
Value
Value
0-31
0 Internal temperature normal
1 Internal temperature abnormal (Standby mode)
2 Internal temperature abnormal (Temperature is normal now, but it was
abnormal during operation.)
3 Internal temperature abnormal (Brightness of the backlight decreases.)
4 Temperature sensor abnormal
Value Temperature at temperature sensors are returned in the following forms:
[Sensor 1], [Sensor 2], [Sensor 3]
This monitor does not have sensors 2 and 3. All return the same value as
sensor 1.
Indicates a temperature sensor abnormality when "126" is returned.
Initialization
0 No detectable error has occurred
1 Standby mode by POWER button
2 Main power off by the main power switch
3 Standby mode by RS-232C
4 Waiting mode by No Signal
6 Standby mode by abnormal temperature
*
No
Yes
No
Yes
No
Yes
25
E