Setting The Intensity Level - PetPal CC360 Owner's Manual

SETTING THE INTENSITY LEVEL

It is very important to set the correct intensity level on
your PA 300 Training System before beginning your
training sessions to provide the proper level of
stimulation without over-stimulating your dog.
1. Place the Intensity Selection dial so that the system
is set on Level 1.
2. Turn on the Collar Receiver and then fit it properly
around your dog's neck.
3. Press the 'Cont.' button and check for a reaction.
Indications of your dog feeling the stimulation
include outward signs of discomfort or confusion on
it's face, ears perking up, changes in tail
movements, etc.
4. If there are no signs of your dog feeling the
stimulation, increase
increments of one until your dog reacts to the
stimulation.
5. At this point, increase the Intensity Level by one or
two. This should be your dog's ideal training level.
NOTE
Some dogs may require more or less stimulation depending
upon their individual temperament and/or size.
the Intensity Level
16
in