TABLE OF CONTENTS Table of Contents......... 3 • Introduction..........4 • Package Contents ......... 5 • Model Features..........5 • Parts and Functions ........6 • Turning ON and OFF........10 • Adjusting and Positioning • Your Collar for Proper Fit......11 Testing............
Continuous Stimulation and the Beep function. The collars are 100% waterproof and can be worn even when the dog is submerged. The PetPal Series Dog Training Collar is durable, safe and very humane when used correctly. The automatic safety...
PACKAGE CONTENTS • Transmitter • Collar Receiver • Test Light • Owner’s Manual • 3 Volt Batteries for collar included • Transmitter battery not included (Transmitter uses a 9 volt battery) MODEL FEATURES • Digital Technology • Up to 300 yard range •...
PARTS & FUNCTIONS Antenna Indicator Intensity Light Selection Dial Beep Constant Button Stimulation Button Battery compartment Magnet (in back) Indicator (Red Mark in back) Lanyard attachment Transmitter (PA300 shown)
Page 7
PARTS & FUNCTIONS CONT. Intensity Selection Dial The intensity selection dial allows you to choose between sixteen different levels of stimulation for very precise control. Transmitter Antenna Be sure to check that the antenna is securely fastened to the transmitter before each use. Hand-tightened only. Be careful when screwing the antenna into the transmitter: over- tightening can cause damage to the antenna or the antenna mount.
PARTS & FUNCTIONS CONT. Magnet Electrodes Indicator Light Mark (Magnetic Switch Collar Belt with Indicator) Embedded Receiver Battery Antenna Compartment Collar Receiver...
Page 9
PARTS & FUNCTIONS CONT. Collar LED Indicator Light The red LED light on the collar unit will flash to indicate the unit is ON. When the battery in the collar unit has a sufficient charge, the red LED light will flash about once every two seconds while the unit is ON.
TURNING THE UNIT ON AND OFF Turning the Collar Unit ON 1. Hold the Red Mark (Magnet Indicator) on the back of the transmitter directly against the Red Mark (Magnet Indicator) on the side of the collar receiver. You can also use the magnet on the belt to turn the collar ON.
ADJUSTING & POSITIONING YOUR COLLAR FOR PROPER FIT Proper collar tightness and position are very important to insure safety and correct functioning every time you use the collar. • All electronic collars need to fit very snugly to work properly. They must be just tight enough to allow the “prongs”...
Selecting Proper Intensity Level The first and most important step in training your dog with your PetPal Training System is determining the correct Intensity Level to provide the proper training stimulation without over-shocking your dog.
REPROGRAMMING 1. Hold the Red Mark (Magnet Indicator) on the back of the Transmitter directly against the Red Mark (Magnetic Switch Indicator) on the side of the Collar Receiver. 2. A small red light inside the Collar Receiver will light up solid for about 1 second, followed by 5 flashes.
Since no electronic device is perfect, there is a very slight possibility that your dog may receive an unintentional electric stimulation. • Your PetPal Trainer is a very valuable tool if used correctly. It is extremely important that you completely understand all the functions of the collar and how to properly train with it before placing it on your dog.
MAINTENANCE • It is very important to periodically clean your PetPal Trainer for maximum performance. Regular cleaning will also lengthen the life of your unit. • Clean the PetPal Trainer collar box with lukewarm water and a mild anti-bacterial soap.
Need help?
Do you have a question about the PA300 and is the answer not in the manual?
Questions and answers