Get To Know Your Device; How To Use The Accessories - Beko D 8300 SM Instruction Manual

en

Get to know your device

Warning
Below information about accessories are
supplied just for reference. Below accessories
may not be exactly same as the accessories
of your appliance.
Fig. 1
A)
Freezer compartment
B)
Fridge compartment
1. Ice cube tray
2. Freezer shelf
3. Interior light
4. Thermostat knob
5. Fridge compartment shelves
6. Bottle and can rack
7. Defrost water collection channel - Drain
tube
Crisper humidity controls
8.
Crisper cover
9.
Salad crisper
10.
Adjustable front feet
11.
Dairy compartment
12.
Door shelf
13.
Egg tray
14.
Sliding storage boxes
15.
Bottle shelf
16.

How to use the accessories

Crisper separators (Fig. 7-a)
The separators inside the crisper are designed
to protect fruits and vegetables against
bruising.
Crisper humidity controls (Fig. 7-b)
This has been designed to keep your
vegetables fresh, without losing moisture.
For this purpose, cold air circulates around
the crisper. The amount of cold air passing
out of the crisper can be regulated with the
controls found on the front of its cover. You
may set the humidity-control knob to the
position appropriate to adjust the degree of
moisture and coldness of the foodstuffs inside.
If you want these to cool further, set the control
to "Open", if you want them to cool less but
retain their moisture for a long period, set it
to "Closed". Positions in between allow you
to regulate cooling and moisture-retention as
you desire.
Sliding storage boxes (Fig. 7-c)
This accessory is designed to use the door
shelves' volume more efficiently. Moving those
boxes right or left helps to easily settle high
bottles to the shelf below.
Bottle and can rack (Fig. 7-d)
This accessory can be used for storing either
a bottle or 3 pieces of cans side by side
3
en