Part Names Of The Main Unit; Listening With Headphones - Sharp Aquos LC-20B8U Operation Manual

Part Names of the Main Unit

Controls
Upper control panel
CH (Channel) ( )/( )
VOL (Volume)
(–)/(+)
Speaker
OPC (Optical Picture Control)
sensor
Remote sensor
A
• INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
■ Plug the headphone mini-plug into the headphone jack located on the front of the main unit.
A
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
10
INPUT
MENU POWER

Listening with Headphones

Headphones
How to adjust the angle
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. The LCD TV set can
also be rotated up to 12 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
Speaker
Headphone jack (
Plug the headphone mini-plug into the headphone
jack located on the front of the main unit.
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when "OPC" is
set to "ON". (See page 19.)
POWER/WAKE UP TIMER indicator
POWER/WAKE UP TIMER indicator lights up green when the
power is on, and red when in the standby mode (the indicator will
not light when the main power is off), and orange when the wake-
up timer is set (the indicator will light when in the standby mode).
▼ On-screen display
VOLUME
)
20
Adjust the sound volume
+ –
using VOL ( ) / ( ) on the
remote control.