Samsung WD85N7 Series User Manual page 64

Troubleshooting
Information codes
If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Code
4C
4C2
5C
dC
DC1
64 English
WD85N74FNOR_DC68-03902G-02_EN.indd 64
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
Make sure the water taps are not frozen.
•
• Make sure the washing machine is operating with sufficient
water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh filter as it may be clogged.
NOTE
When the washer displays the "4C" code, the washer do draining
for 3 minutes. During this time, the Power button is inoperative.
• Make sure the cold water supply hose is firmly connected to
the cold water tap.
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending on
the connection type.
• Clean the debris filter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
The Main Door lock/unlock is not working properly.
Turn the machine off, and restart the cycle.
•
• If the information code remains, contact a customer service
centre.
Action
2018/10/26 9:30:36