Easy@Home 16113906 User Manual page 27

3. Push the hooks
shaving foil unit
(see Fig. J and K)
4. Pull the shaving foil unit down and out of the shaver
head frame (see fig. K).
5. Dispose of the used shaving foil unit as described in
the chapter "Disposal".
6. Place the new shaving foil unit in the shaver head
frame so that:
a) the guide braces inside the shaver head frame
extend into the guide grooves outside along the
shaving foil unit and
b) the recess in the shaving foil unit
same side as the recess inside the shaver head frame.
7. Place two fingers on the back side of the integrated
trimmer.
8. Push the shaving foil unit into the shaver head frame
until the hooks audibly lock into the shaver head
frame.
9. Firmly mount the shaver head on the shaver until the
locking mechanism audibly locks into place
(see fig. E).
10. Place the protective cap
Your shaver is now ready for use again.
AFTER SALES SUPPORT
Cleaning and maintenance
14 on the left and right of the
16 into the shaver head frame
1
877-386-8264
USA
is on the
16
onto the shaver.
USA
15
15
27