Weekly Cleaning - Easy@Home 16113906 User Manual

USA
Cleaning and maintenance
7. Carefully dry the shaver head with a lint-free cloth or
a paper towel. In the process, do not push the shaving
foils in.
8. Thoroughly rinse off the top part of the shaver and
the shaver blades under warm running water
(see fig. G).
9. Use the On/Off switch
without the shaver head for approx. 5–10 seconds to
dispel any drops of water off of the shaver blades
10. Use a lint-free cloth or a paper towel to thoroughly
dry off the shaver.
11. Firmly mount the shaver head on the shaver until the
locking mechanism audibly engages (see fig. E).
12. Place the protective cap
The shaver is now ready for use again.

Weekly cleaning

It is recommended that you thoroughly clean the shaver
once a week. To do so, proceed as follows:
1. Use the On/Off switch
2. Before cleaning, pull the 5 V plug
shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
shaver head
5. Pull the shaver head up and off.
24
TM3service@outlook.com
5
to switch the shaver on
1
5
to switch the shaver off.
(see fig. D).
2
877-386-8264
USA
on the shaver.
out of the
8
4 to release the
3
.