Easy@Home 16113906 User Manual page 25

6. Knock the shaver head out gently over a sink to re-
move stubbles.
7. Thoroughly wash the shaver head under warm
running water from the inside and outside
(see fig. F).
8. Carefully dry the shaver head with a lint-free cloth or
a paper towel. In the process, do not push the shaving
foils in.
9. Without the shaver head mounted, use the On/Off
5
switch
5–10 seconds to dispel any stubble from the shaver
3
blades
10. Switch the shaver back off.
11. Use the cleaning brush
stubbles from the shaver blades and the entire top
part of the shaver (see fig. H).
12. Thoroughly rinse off the top part of the shaver and
the shaver blades under warm running water
(see fig. G).
13. Use the On/Off switch
without the shaver head for approx. 5–10 seconds in
order to dispel water drops from the shaver blades
14. Use a lint-free cloth or a paper towel to thoroughly dry
off the shaver.
15. Firmly mount the shaver head on the shaver so that the
locking mechanism locks into place (see fig. E).
16. Place the protective cap
The shaver is now ready for use again.
AFTER SALES SUPPORT
to switch the shaver on for approx.
.
5
877-386-8264
USA
Cleaning and maintenance
7
to completely remove all
to switch the shaver off
on the shaver.
1
USA
3
.
25