Simple Button Operations For Changing Channels - Sharp AQUOS LC-46D82U Operation Manual

Watching TV
Method 1
Using CH A/V on the remote control unit or on the
TV.
You can change channels in several ways.
VOL _ INPUT POWER
Method 2
1 Press FLASHBACK to switch to the previously tuned
channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
VOL CH
sdh
FREEZE MENU
C®S
-- FAVORITECH --
®®@®
AQUOS
SHARP
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a t or 2-digit channel number
(e. g.,
Channel 5):
Press5-->ENT
, When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-g only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
PressI_I_5->ENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 ->2-> • (DOT) ->I->ENT
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
Q-18