Echo CSG-7410 Operator's Manual page 7

1. Operator's manual - Included with unit.
Read before operation and keep for future
reference to learn proper, safe operating
techniques.
2. Front handle (for the left hand) - Support
handle located at the front of the engine
housing.
3. Wheel guard - A wheel guard which is intend-
ed to protect the operator from wheel con-
tact, and also direct debris away from the
operator.
4. Wheel - Serving as a cutting tool.
5. Wheel mouting bolt - Bolt that secures the
flange.
6. Cutter flange - Part that secures the cutting
wheel.
7. Fuel tank cap - For closing the fuel tank.
8. Momentary stop switch - Button for momen-
tarily shorting ignition voltage, causing the
engine to stop. This is NOT an ON/OFF
Ignition switch.
9. Throttle trigger - Device activated by the
operator's finger, for controlling the engine
speed.
10. Throttle trigger lockout - A safety lever which
must be depressed before the throttle trigger
can be activated in order to prevent the
accidental operation of the throttle trigger.
11. Choke control knob - Device for enriching the
fuel/air mixture in the carburetor to aid cold
starting. Also activates fast idle throttle latch.
NOMENCLATURE OF PARTS
12. Starter grip - Pull handle slowly until starter
engages then quickly and firmly.
When engine starts, return handle slowly.
Do not let handle snap back or damage to
unit will occur.
13. Air cleaner cover - Covers air cleaner.
14. Rear handle (for the right hand) - Support
handle located towards the rear of the
engine housing.
15. Water kit - Supplies water while cutting to keep
dust from scattering.
16. Clutch cover - Protective belt and clutch when
the engine cut-off saw is in use.
17. Arm mounting bolts - Secures the cut-off saw.
18. Pulley Cover - Protects the belt and pulley.
19. Wheel guard locking knob - For use when
changing the angle of the wheel guard.
20. Wheel guard knob - Grip and move this knob
when changing the angle of the wheel guard.
21. Spark arrestor muffler - The spark arrestor
muffler controls the exhaust noise and
prevents hot, glowing particles of carbon
from leaving the muffler.
22. Decompression device - Device for lowering
the compression in the cylinder, to aid
starting.
23. Safety labels - Device for lowering the com-
pression in the cylinder, to aid
starting.
7
CSG-7410