Page 1
Mimo Vue 10.” HD Display HMDI Capture Set Up Guide Model Number: UM-1080CP-B Please keep this Set-Up Guide for future reference. www.mimomonitors.com 1-855-YES-MIMO 2018-0425...
Table of Contents Introduction ............................3 Compatibility requirements:........................3 DisplayLink Driver Information ......................3 DisplayLink Driver Installation ....................... 4 Unboxing and Assembly Instructions ....................4 Wiring and Connections ........................7 Windows - Calibration for Touch Displays..................... 7 Windows 7 ............................7 Windows 10 ............................
Designed to be a perfect conference room control interface, the Mimo Vue HD with HDMI capture UM-1080CP-B is the second generation of Mimo Monitors 10.1” monitor line. It features a modern zero bezel design, nearly 180-degree viewing angle from its bright, high contrast, IPS screen, and a resolution of 1280x800.
DisplayLink Driver Installation Go to www.displaylink.com . At the top left of the screen, you will find a button labeled DOWNLOAD DRIVERS, click on that button to download the necessary driver(s). The website will then prompt you to select the correct Supported Operating System. The website will then prompt you to select the correct version of the operating system you are running on the computer being set up.
Windows 7 : If you are running Windows 7 the following steps for calibration still apply, however, you will need to install additional Mimo drivers. Please either call Mimo Monitors at 855-937-6466 or you may send an email request to info@mimomonitors.com.
HMDI cable is connected to the PC. Extending USB Cable (Blue): If necessary, the USB cable can be extended using active cabling. Please read this related article on our website: USB extension and the UM-1080CP-B. www.mimomonitors.com 1-855-YES-MIMO 2018-0425...
Need help?
Do you have a question about the UM-1080CP-B and is the answer not in the manual?
Questions and answers