Connecting To External Equipment; Connecting A Blu-Ray Disc/Dvd Player Or Hd Cable/Satellite Set-Top Box - Sharp AQUOS LC-19SB28UT Operation Manual

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See page 13.)
For connecting the TV to external equipment, use commercially available cables.
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box

■ When using HDMI cable (INPUT 3):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Rear of the TV
NOTE
• Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.
• Digital Audio output is not available when using an HDMI Input.
■ When using DVI-HDMI conversion cable (INPUT 3):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Rear of the TV
NOTE
• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set "HDMI Audio" to "DVI". (See page 27.)
14
HDMI-certified cable
HDMI OUT
Ø 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
DVI OUT AUDIO