I/P Setting; Film Mode (3:2 Pull-Down); 3D-Y/C; Monochrome - Sharp Aquos LC 45GD4U Operation Manual

Basic adjustment settings

I/P Setting

Converts input signals from interlace to progressive.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "Advanced", and then
press ENTER.
4
Press a/b to select "I/P Setting", and then
press ENTER.
5
Press c/d to select "Fast" or "Slow", and
then press ENTER.
NOTE
• "I/P Setting" is not selectable when channel display shows
an input resolution of 480P or 720P.

Film Mode (3:2 pull-down)

Automatically detects a film-based source (originally
encoded at 24 or 30 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
1
Repeat steps 1 to 3 in I/P Setting.
2
Press a/b to select "Film Mode", and then
press ENTER.
3 Press c/d to select "On", and then press
ENTER.
Selected item
Off Normal viewing mode
On
Detects, analyzes, converts film source
36
Description

3D-Y/C

Provides high quality images with minimal dot crawl
and cross color noise.
1
Repeat steps 1 to 3 in I/P Setting.
2
Press a/b to select "3D-Y/C", and then
press ENTER.
3
Press a/b to select the desired level, and
then press ENTER.
Selected item
Standard Normal adjustment
Fast
For movie image
Slow
For still image
NOTE
• 3D-Y/C is available only for Composite Video input.

Monochrome

For viewing a video in monochrome.
1
Repeat steps 1 to 3 in I/P Setting.
2
Press a/b to select "Monochrome", and
then press ENTER.
C. M. S-Hue
C. M. S-Saturation
C. M. S-Value
Color Temp.
Sharpness Enhancement
Automatic Contrast

I/P Setting

Film Mode

3D-Y/C

Monochrome

3 Press c/d to select "On", and then press
ENTER.
Selected item
Off Normal color
On
For viewing in monochrome
Description
On Off
Description