Reset; Input Select - Sharp Aquos LC 37SH20U Operation Manual

Useful adjustment settings

Reset

If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Reset", and then press
3
ENTER.
• If you already set the Secret No., input the
4-digit secret number here. See page 38 for
setting a secret number.
• "Return to the factory preset values" displays on
the screen.
Press c / d to select "Yes", and then press
4
ENTER.
• "Now, TV will restart automatically. OK?"
displays on the screen.
Press c / d to select "Yes", and then press
5
ENTER.
• "Now Initializing" displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will
have returned to its original settings.
NOTE
• The AV MODE will be set to "STANDARD".
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
Now initializing

Input Select

Selecting input source
Use this menu to select the input source.
Press INPUT.
1
• A list of selectable sources appears.
Press INPUT again to select the input
2
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a / b .
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 terminal.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select the signal type you
4
want to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any color.
Press MENU to exit.
5
NOTE
• If you set INPUT 1 to Auto, the TV will automatically select
the input signal.
• Check the operation manual of the external equipment for
the signal type.
• Setting INPUT 1 signal selection to "Auto" when other
equipment is connected will result in the following
connection priority.
INPUT 1
1. COMPONENT VIDEO
2. VIDEO
31