Initial Setup - Sharp Aquos LC 37SH20U Operation Manual

Watching TV

Initial setup

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 8.)
2. Connect the antenna cable to the TV. (See page 13.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
Language setting
Select from among 3 languages: English, French and
Spanish.
Press a / b to select the desired language
1
listed on the screen, and then press ENTER.
Language
Standby Mode
Air/Cable
CH Search
Standby Mode setting
2
Select the standby setting. (See page 30.)
Language
Standby Mode
Air/Cable
CH Search
Mode 1: Starting TV is quick from standby.
Mode 2: Power consumption is small at the standby.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
Press c / d to select "Air" or "Cable".
3
Press ENTER to enter the setting.
Language
Standby Mode
Air/Cable
CH Search
English
Français
Español
Mode 1
Mode 2
Example
Air Cable
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Press c / d to select "Yes" for AIR Analog &
4
Digital, then press b to move down.
Press c / d to select "Yes" or "No" for
CABLE Analog, then press b to move down.
Press c / d to select "Yes" or "No" for
CABLE Analog & Digital, then press b to
move down.
Select "Search Start", and then press
ENTER.
• If you are only receiving an analog signal through
the cable, select "Yes" for CABLE Analog. If you
are receiving both an analog signal and a digital
signal through the cable, select "Yes" for CABLE
Analog & Digital.
Language
Standby Mode
Air/Cable
CH Search
Example
CH Search
ANALOG [ 25
Air
CH Search
DIGITAL Air [ 25
Air
Audio
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try EZ setup again. (See page 20.)
AIR Analog & Digital Yes No
CABLE Analog Yes No
CABLE Analog & Digital Yes No
Search Start
] [ 20 ]
Found
] Found [ 20 ]
ANALOG
2
: MONO
15