Initial Setup - Sharp AQUOS Operation Manual

sharp operation manual
>> On-Screen Display Menu
<<
Example
file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/4-5.html?next

Initial Setup

NOTE
• For operating the on-screen display menu,
see page 4-3.
Easy Setup
You can change the settings of the Initial Installation.
Language: Select from among 3 languages (English,
French and Spanish).
Power Saving: Select "Yes" or "No" to configure default
Display settings.
Yes: AV MODE is set to "STANDARD".
No: AV MODE is set to "DYNAMIC (Fixed)". Picture Reset
can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
even after 30 minutes elapses, AV MODE is not reset to
"DYNAMIC (Fixed)".
Antenna & Cable/STB: Select the type of connection you
will use to watch TV.
Air/Cable: Make sure what kind of connection is made with
your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all
channels viewable in the set area.
Completed: The settings confirmation screen is displayed.
Confirm the information displayed on the screen.
NOTE
• See Initial Installation on
pages 2-2 to 2-6 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try "Easy Setup" again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
ENG 4-5
Language
You can also select a language from the Initial Setup menu.
Select from among 3 languages: English, French and
Spanish.
NOTE
• To change the language of the manual, select "MENU" >
"Initial Setup" > "Language" to change the language.
Then, press MANUAL again.
TV Channel Setup
Channel Setup
If Initial Installation does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made with
your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all
channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using CH
.)
Off: Does not skip channels. (Channel selection enabled
using CH .)
NOTE
• See Initial Installation on
pages 2-2 to 2-6 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
Page 1 of 1
2020/3/25