Output Select; Quick Shoot; Quick Shoot; Sleep Timer - Sharp Aquos LC 32GD6U Operation Manual

Useful adjustment settings

Output Select

Allows you to select what controls the audio output.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Output Select", and
then press ENTER.
4
Press c/d to select "Fixed" or "Variable",
and then press ENTER.
Selected item
• Sound via speaker is adjusted with VOL
k/l on the remote control unit or VOL l/
Fixed
k on the Display.
• Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
• Sound via the MONITOR OUTPUT terminal
is adjusted with VOL k/l on the remote
Variable
control unit or VOL l/k on the Display.
• Sound via speaker is muted.

Quick Shoot

Use Quick Shoot Operation to record action video more
clearly.
1
Repeat steps 1 and 2 in Output Select.
Press a/b to select "Quick Shoot", and then
2
press ENTER.
3 Press c/d to select "On", and then press
ENTER.
NOTE
• Quick Shoot may cause image noise. If this occurs turn
the function "Off".
Description

Sleep timer

Allows you to set a time when the TV automatically
switches to standby.
1
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remaining
2
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before time expires, the remaining
time displays each minute.
Sleep Timer:
Sleep Timer:
Sleep Timer:
Sleep Timer:
Sleep Timer:
NOTE
• Select "OFF" by pressing SLEEP to cancel the sleep timer.
• If the sleep timer is activated when set to zero, the TV will
enter STANDBY mode.
30
Off
30
60
90
120
71