Page 1
ROPE AZTEC ADVENTURE 2 ASSEMBLY INSTRUCTION 1.Take out the metal and rope parts from its packages. 2. Assemble the metal parts as mentioned in Picture 1, 2, 3, 4, 5, 6 and 7. 3.Secure the metals standing vertical on embedded ground.
Page 2
7. Fixing of bolts are shown on pictures with details.(Picture 11,12 and 13) 8. After rope assembly,while the Aztec walls on ground, should done the fixation with below metals. 9.Below metals fixed walls,as shown in Picture 17, 18, 19 and 20,places the ledge on metals.Then install nuts with bolt caps..
Page 4
Picture 10 Picture A.) After getting through the nuts at the end of ropes,bolt caps are getting through from nuts., Picture 11 B.) After fixed the nut bolt cap,streghten the bolts on nut with appropriate spanner. Picture 12 C.).After bolt streghten,fixes the plug of bolt cap.