Advertisement
Quick Links
Advertisement
Related Manuals for Aztec ROPEVENTURE 4
Summary of Contents for Aztec ROPEVENTURE 4
- Page 1 AZTEC ROPEVENTURE 4 ASSEMBLY INSTRUCTIONS...
- Page 2 Aztec Plastic Walls Vertical Connecting Ground Metals (4 Pieces) (4 Pieces) Poles (4 Pieces) Rope Connecting Tubes (3 Pieces, 1 Long 2 Short) and Connecting Piece Climbing Ropes...
- Page 3 1- Attach the 2 pieces aztec plastic walls to the ground metal. During the assembly king figure must be on bottom left. (Picture 1) King figure Ground Metal King figure Aztec Plastic Wall Ground Metal Top Bolt Cover M10x60 Bolt...
- Page 4 2- Bring to connecting piece to the middle of the long connecting tubes. Then squeeze the socket-head cap screw. Attach the short tubes on right and left side on the connecting piece then squeeze the socket-head cap screw. (Picture 2) Short Tube Long Tube Short tube...
- Page 5 3- Place the poles to the concretes which you are going to install. Attach the rope connecting poles to the connecting pin on the top of the poles. Use M10x60 Bolt, M10 Nut and bolt cover for attaching.(Picture 3) Connecting Pins Top Bolt Cover M10x60 Bolt...
- Page 6 4- Remove the climbing ropes from their packages and attach to the poles and rope connecting tubes. Fix the bolts is on the edge of the ropes with using M10 Nut and bolt cover. (Picture 4) Bottom Bolt Cover Displays connection the ropes to the tubes Displays connection ropes...
- Page 7 5- Attach the aztec plastic walls to the auricles on the vertical connecting poles. Connect using bolts etc as before. (Picture 5) Bottom Bolt Cover Top Bolt Cover M10x60 Bolt (Picture 5)
- Page 8 6- Drill the all holes through the anchor hole on the ground metals. Use the anchors provided to secure the structure.(Picture 6) Anchor Concrete Ground Metal (Picture 6)
Need help?
Do you have a question about the ROPEVENTURE 4 and is the answer not in the manual?
Questions and answers