Advertisement
902-757 Corkscrew Aztec Climber
STEP #9:
Plumb & level entire unit. Fully snug all fasteners. Push bolt
caps in to bolt covers. Pour Concrete with slight dome to ensure
proper drainage.
resilient safety surfacing.
STEP #10: Attach Warning Label and Manufacturer's Identification Label to a
clean surface.
they are clearly visible and legible and away from normal hand
and foot placement areas.
become illegible, destroyed or removed.
for replacement Labels.
SportsPlay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO 63120 (314) 389-4140
Wait 48 hours before removing braces. Install
The Labels should be attached in a location where
The Labels must be replaced if they
www.sportsplayinc.com
Page
Rev. 04/9/2010
Contact your distributor
10
Advertisement
