Radio Compliance Information - Wireless Solution W-DMX G3 User Manual

User Manual - English

1. Radio Compliance Information

FCC IDENTIFIER: NY2-WDMXTRX
Name of Grantee: Wireless Solution Sweden Sales AB
Equipment Class: Part 15 Spread Spectrum Transmitter
FCC Rule Parts: 12C2402.0
General Notes : The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located cooperating in conjunction with
any other antenna or transmitter. Users and installers must comply with operating manual.
This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
users will be required to correct the interference at their own expense.
Modification Warning! Changes or modifications to this equipment, not expressly approved by
Wireless Solution Sweden Sales AB could void the user's authority to operate the equipment or void
the FCC approval and negate your authority to operate the product.
Safety Notices: Please read this entire manual before using your new equipment. Please keep the
manual in a safe place so you can refer to it in the future as required.
W-DMX™ is intended for use only by qualified lighting professionals. Connection, installation, and
hanging of this equipment must be performed in accordance with all pertinent local, regional, and
national safety codes and regulations.
This equipment shall not be used to operate moving-scenery or moving-truss structures, DMX-
triggered motors/hoists or lifting devices including, but not limited to, stage lifts operated by DMX,
hydraulic systems or any moving component that may cause harm to human-beings in case of failure.
It should not be used to trigger flames or pyro equipment, explosive powered tools or compressed air
equipment. It shall also not be used with water pumps or any water related equipment triggered
wirelessly and subject to failure where it may cause harm to human-beings.
Please do not use with any theatrical flying and rigging operations, or any device that may fail due to
break of RF signal. W-DMX™ products shall not be used with firearms or weapons triggered by wireless
equipment.
Please keep the equipment dry unless it is clearly specified to work outdoors. Do not operate in
excessive heat or direct sunlight, and provide adequate ventilation.
Do not place anything on top of the Products that weighs more than 5 pounds (2.25 kg). Excessive
weight on top could damage the chassis.
There are no user-serviceable parts inside. All serviceable work shall be done by qualified service
personnel, generally appointment by the Manufacturer.
The Product is furthermore not intended for use within a non-entertainment, architectural or motion-
picture lighting related business, such as:
5