Enabling 5 Ghz; Double-Up Mode; Repeater Mode; Switching Off Unv 2 - Wireless Solution W-DMX G3 User Manual

5.6. Enabling 5 GHz

Due to the different regulations worldwide, all W-DMX
front-interface control. This must be enabled with the W-DMX
available from the website. Once on, you may be able to scroll through all modes.

5.7. Double-Up Mode

Coming soon.

5.8. Repeater Mode

All F-2 models are capable to operate as repeaters, as long as configured to do so:
1. Set the device to G3 mode.
2. Cycle through the radio direction like in 5.4.
3. The cycle sequence in F-2 units is: TX – TX ; RX – RX ; RX - TX
4. Use this last sequence to make your F-2 unit to repeat.
5. Pair the first transmitter in the chain to the RX side of the F-2 unit in G3 Mode.
6. Establish the TX link with succeeding receivers.

5.9. Switching Off UNV 2

With F-2 models you can switch off RADIO B.
When the unit is in (TX, TX) direction, RADIO B can be turned off by pressing the button for RADIO B
during power up. When turned off, the PWR LED in RADIO B will turn off.
To enable RADIO B, press and hold the button for RADIO B during power up.
12
User Manual - English
devices come with 5 GHz disabled from
™
™ Dongle and Configurator software,