To Play In The Desired Order (Programmed Playback) - Sharp DV-AT4000 Operation Manual

" To play in the desired order (programmed
play)
You can play back the desired tracks in the sequence you want.
Maximum of 19 tracks can be programmed.
1
While stopped, press the P.MODE
button.
Information on all the loaded discs is read,
and then the programming screen ap-
pears.
2
Press the button.
3
Press the or button to select
"Add" and press the ENTER button.
4
Press the or button to select a
disc number and press the ENTER
button.
5
Press the or button to select a
track number and press the ENTER
button.
6
7
Favorite List
NO Disc Index
RIGHT ARROW first, then select command. To play,
press PLAY, to quit, press PROGRAM.
Favorite List
NO Disc Index Add
Insert
Modify To change the programmed contents:
Delete
Clear
1 While stopped, press the P.MODE button.
2 Use the
3 Use the
Favorite List button.
NO Disc Index Disc1 "Add"
Disc2
Disc3
"Insert" Adds a track between programs. In this case, insertion is made above
Disc4
Disc5
"Modify" Modifies the program.
"Delete" Deletes the selected program.
"Clear"
Favorite List
NO Disc Index 1
2
3
4 Notes:
! Programming cannot be performed while paused or in the playback mode.
! Sequence programming does not work with a disc that disables programming.
! To exit the programming procedure halfway through, press the P .MODE button.
! To check the status during the programmed play, press the P.MODE button.
! When operating SVCD/VCD with the P .B.C. function, set the sequential play mode
to SEQ.2 (see page 30).
Repeat steps 2 - 5 for other tracks.
Up to 19 tracks can be pro-
grammed.
Press the / button to start play.
! "PROG." lights up on the main unit dur-
ing programmed play.
! Programmed selections are memorized until a disc is removed or you turn the
power off.
! The
/ button does not allow you to operate programmed play if the
is pressed. In this case, press the P.MODE button to show the programming
screen and then press the / button.
! Select one of the programmed tracks with the
the / button. Playback will start from the selected track.
or button to select an item and then press the
or button to select the desired command and then press the ENTER
Adds a track to the program.
(before) the selected program.
Deletes all programs.
DV-AT4000
Favorite List
NO Disc Index
1 4 Track1
2 3 Track2
3 2 Track3
4 1 Track4
button
or button and then press
button.
33