Operation Instructions; Connect The Tool; Diagnosis System; Select Control Unit - Vehicletool Mini VAG505A Manual

Mini VAG505A/VAG506M/VAG506/V801
1. Connect the Mini VAG506/VAG506M/VAG506/V80
1.1 Turn the ignition off.
1.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
1.3 Plug the OBDII connector to the vehicle's DLC.
1.4 Turn the ignition on. Engine can be off or running.
The tool will auto start, the following screen will be displayed.
Wait a moment, the screen will auto display the Main Screen.

2. Diagnosis system

With the scan tool in Main Screen (Figure 1.1), select the Diagnosis,
and press ENTER button. Wait for the Diagnosis screen to appear. The
scan tool will list all Control Unit.

2.1 Select Control Unit

With the scan tool in Control Mode screen (Figure 2), use UP/DOWN
scroll button to select system, and press ENTER button. The scan tool
will list all systems, and you can manually select the detecting system,
the scan tool will list all Systems screen (Figure 2.1).

Operation Instructions

Figure 2
Figure 1
7
1