Global; Introduction; Daw (Digital Audio Workstation) Selection; Bluetooth - Studiologic SL Mixface User Manual

Global

Introduction

The last editing section of Mixface allows edit the
global settings of the unit.
There are 3 functions available:
•
DAW Port and Type;
•

Bluetooth;

•

MIDI Merge;

•

Factory restore.

DAW (Digital Audio Workstation) selection

When selecting DAW, the user can choose the control
port of his Digital Audio Workstation (USB or Bluetooth)
and the software used (Cubase, Digital Performer,
Ableton Live, Presonus Studio One, Avid Protools).
The list of compatible DAW's will be updated and
extended over time, thanks to the possibility of
updating the firmware of Mixface via USB port.
Currently you can check the following DAW (Digital
Audio Workstation):
•
Steinberg Cubase / Nuendo;
•
Motu Digital Performer;
•
Ableton Live;
•
Presonus Studio One;
•
Propellerhead Reason;
•
Apple Logic / GarageBand;
•
Avid ProTools.
12
SL Mixface by Studiologic®
Bluetooth
The Bluetooth function allows the Bluetooth wireless
communication to be activated and deactivated
towards the computer.
This mode allows you to remotely control the Mixface
(DAW and CTRL mode) wirelessly and to implement in
your Studiologic MIDI Controller the ability to play, for
example, a virtual instrument wirelessly.
NOTE
In Bluetooth mode, Mixface make available only one
port (called SLMIX BT), and the transport buttons of
Mixface work only in DAW mode in order to avoid
possible interferences in the workflow.
If required, the PIN code is "0000".
MIDI Merge
The MIDI Merge function allows to mix the MIDI
data of the Bluetooth and USB Device ports to
other outputs in the following combinations:
•
From Bluetooth to: none (none), USB Device,
USB Host;
•
From USB Device to: none (none), USB Host.
Factory restore
The Factory Restore function deletes all user-
programmed settings
restores the factory settings. The screen asks for
confirmation, in order to avoid unwanted actions.
To proceed press IN.
and Programs and