Husqvarna LC 18 Operating Manual page 7

To assemble the handle
1. Attach the lower handle with 2 screws and nuts on
each side of the product.
2. Lift the upper handle until it aligns with the lower
handle. Tighten the knobs.
CAUTION: Be careful and do not cause
damage to the cables when you lift the
upper handle.
To assemble the grass catcher
1. Put the top part of the grass catcher onto the lower
part of the grass catcher.
928 - 001 - 17.12.2018
2. Lift the rear cover.
3. Hold the grass catcher at the grass discharge
channel.
4. Lower the rear cover to lock the grass catcher into
position.
To assemble the mulch plug
1. Lift up the rear cover and remove the grass catcher.
2. Put the mulch plug (A) into the discharge channel.
3. Close the rear cover.
A
7