Sharp MD X5 Operation Manual page 25

(Continued)
1
2
3,4
1
2
3
4
2
1
2
3
4
*22-34
2
1
3,4
24
H H H H H Erase
To erase tracks one at a time:
1
While in the stop mode, select the track to be erased using the 5 or
4 button.
I Start playing the track you wish to erase, and press the MD 06 button.
2
Press the NAME/TOC EDIT button, and then select "ERASE" using the
or button.
3
Within 10 seconds, press the ENTER button.
I To cancel the operation, press the MD H button.
4
Press the ENTER button again.
I The track is erased, and the unit is stopped at the beginning of the
previous track.
I When a track is erased, the numbers assigned to the tracks following
the erased track will be automatically decreased by one.
Notes:
I Once a track has been erased, it cannot be recovered. Double-check
the track number before erasing it.
I When a track is erased, the track name will be erased at the same time.
To erase all of the tracks at once:
1
Press the MD H button.
I The total number of tracks and the total playing time for the MD will be
displayed.
2
Press the NAME/TOC EDIT button, and then select "ALL ERASE" using
the or button.
3
Within 10 seconds, press the ENTER button.
I To cancel the operation, press the MD H button.
4
Press the ENTER button again.
I All of the track numbers and track names will be erased.
24
98.6.23, 10:10 AM