Adjusting The Focus; Tips On Taking Pictures - Sharp CE-AG06 Operation Manual

Adjusting the focus

Turn the focus dial to optimize the image of your
subject appearing on the LCD screen of the main
unit.
Caution
Do not force the dial to turn. Turning the dial past
its range of rotation can result in failure.
Memo
Take close-up pictures (about 6 cm apart) with
the focus dial turned to the (
LCD screen of the main unit to make sure that
your subject is in focus.
CE-AG06本文(E)

Tips on taking pictures

• If you take a picture in a dark environment, its
image may look coarse, but this is not a failure.
• When you press the shutter release button, the
image you shot stays still on the LCD screen
Focus dial
for a while until its save is completed, when
the screen is restored, allowing you take the
next picture.
• If you sway the main unit up and down or to left
and right, the display may look jerky as if a video
is fed frame by frame, but this is not a failure.
• Aiming the lens at the CRT tube of a TV receiver
or the display monitor of a computer will display
horizontal streaks on the LCD screen. Similar
streaks will also appear in the image you shot,
but this is not a failure.
• Close-up images may look distorted in their
peripheral area like a barrel due to the
characteristics of the lens, but this is not a
failure.
• Particularly bright parts of a subject, such as
) mark. Check the
the filament of an incandescent lamp, may look
dark, but this is not a failure.
• If you shoot a moving subject, it may look
distorted in form, but this is not a failure.
Page 11 02.1.12, 1:03 PM Adobe PageMaker 6.5J/PPC
11