Red Led Status Indicator - Crime Guard CG 745i Owner's Manual

Hide thumbs

Table Of Contents

Enlarged version

14) Flash-2x & Pause = The security system has detected a trigger from the hood,

trunk circuit or the Port B optional auxiliary sensor input.

15) Flash-3x & Pause = The security system has detected a trigger from the door

circuit.

16) Flash-4x & Pause = The security system has detected a trigger from the Port A

auxiliary sensor input.

Electronic Siren And Flashing Lights

The electronic siren and the vehicle's exterior lights primary function is to attract

attention to your vehicle if the security system is triggered. In addition, they are also

used to communicate with you, as a way of confirming actions that have taken place,

or, that may be in process of automatically taking place. A chirp is the short, sharp

sound the siren makes as part of this communication. The exterior lights referred to

are the vehicle's parking lights. We do not recommend flashing the headlights. The

halogen headlights found in modern vehicles are not designed to be rapidly turned on

and off. If connected to the security system, a reduction of their useful life may be

noticed.

Siren Chirp With Light Flash Confirmation For Arming, Disarming & Valet

Activation: The following siren chirps and flashing exterior light actions inform you

of these conditions of the security system:

1) One siren chirp and one light flash: The system has armed.

Continued Next Page

Page

-18

feature, the doorlocks, and trunk release; the doors will also lock when the ignition

switch is turned "on" and unlock when it is turned "off"'. Note: While the security

system is in the Valet Mode, every time the ignition switch is turned "off", the siren

will chirp once as a reminder.

To Turn Off The Easy Valet: Simply press the Easy Valet Switch, and instantly

the security system will exit out of Valet Mode. To confirm that the Valet Mode is

turned off, the LED Status Indicator will turn off.

Disarming The Security System If The Transmitter Is Lost: In the event the

transmitter is lost, damaged, or its batteries become exhausted, the Easy Valet Switch

and your ignition key can be used to disarm the system:

STEP 1. With the system in the armed condition, enter via the driver's door (be aware

that the security system will trigger the instant the door is opened).

STEP 2. Use the ignition key to turn "on" the ignition switch.

STEP 3. Within 5 seconds, press the Easy Valet Switch. The security system will

instantly disarm.