Crime Guard 850i Operation Manual

Security and remote starting system

Advertisement

L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Crime Guard Keyless Entry & Security, Inc.'s labor and return shipping, to the
original owner during the lifetime of the car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Crime
Guard Keyless Entry & Security, Inc., P.O. Box 508, Douglasville, Georgia
30133, or send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia
30134, with bill of sale or other dated proof of purchase. This warranty is
nontransferable and does not apply to any product damaged by accident, physical
BACK COVER
or electrical misuse or abuse, improper installation, alteration, any use contrary
to its intended function, unauthorized service, fire, flood, lightning, or other acts
PRINTER'S NOTE:
of God.
This warranty limits the Company's liability to the repair or replacement of
production back cover
the product. The Company shall not be responsible for removal and/or reinstallation
charges, damage to or theft of the vehicle or its contents, or any incidental or
is color; this is a
consequential damages caused by any failure or alleged failure of the product to
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
place marker cover.
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
P. O. Box 508
30133
02/04 MO-CG-850i4e
OPERATION MANUAL
850i
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2004: OMEGA RESEARCH & DEVELOPMENT, INC.
4
e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 850i and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Crime Guard 850i

  • Page 1 P. O. Box 508 Douglasville, Georgia www.caralarm.com W A R R A N T Y OPERATION MANUAL 30133 02/04 MO-CG-850i4e 850i FRONT COVER PRINTER’S NOTE: production front cover is color; this is a place marker cover. COPYRIGHT 2004: OMEGA RESEARCH & DEVELOPMENT, INC.
  • Page 2 INSIDE FRONT COVER INSIDE BACK COVER PRINTER’S NOTE: PRINTER’S NOTE: blank page. blank page.
  • Page 3: Table Of Contents

    Alarm Valet Mode & Starting Valet Modes ... 23-25 Status Light ... 25-26 Vehicle Recovery ... 27 Unauthorized Transmitter Alert & Automatic Transmitter Verification ... 26 Programming The 850i e ... 28-29 The 850i e’s Programmable Features ... 30-43 Programming Transmitters or Transceivers ... 43-44 Programming the Echo Transceiver Functions ...
  • Page 4 Page 2 FEATURE SecureCode Programming 30 / 60 Second Activated Alarm Cycle 3 / 45 Second Arming Delay Last Door Arming Automatic Rearming Auxiliary Channel #2 Also Disarms System Parking Light Illumination Upon Disarm Doors Lock At Ignition “On” Unlock #1 At Ignition OFF Unlock #2 At Ignition OFF Open Door Bypass To Features 8, 9, 10 Doors Lock With Last Door Arming...
  • Page 5: Features Programming Checklist

    • If multiple Echo transceivers are programmed to operate the system, the sys- tem will send its signal to only one transceiver- the last one used. • When the Crime Guard 850i e system does send a signal to the Echo trans- ceiver, a few seconds is needed for this “handshake”...
  • Page 6 The Remote Transmitter and Remote Transceiver: Your system “Arm/Lock” comes with two pre-learned remote controls; one is a “transmitter”, and the other is a 2-way “transceiver”, the Omega “Auxiliary Echo. The remote transceiver, in addition #2” to operating your system, also receives Button signals from the system, and displays a variety of system conditions on its LCD...
  • Page 7 visual display; for the next 48 hours the siren will sound a brief series of chirps every time the vehicle’s ignition is turned on. PROGRAMMING THE ECHO TRANSCEIVER FUNCTIONS The Omega Echo transceiver has several user-programmable features: Chirp or Mute The chirps may be turned off, and replaced with vibration. Vehicle Type Choices are a passenger car, pickup truck, or van/SUV.
  • Page 8: Using Your Crime Guard System

    "Disarm/Unlock" button to turn it off (the siren will chirp twice). PROGRAMMING TRANSMITTERS OR ECHO TRANSCEIVERS Your Crime Guard 850i four controllers; these can be any combination of standard Crime Guard transmitters or Omega Echo transceivers. Regardless of which, the transmitter or transceiver must be encoded, or programmed, to the system in order to operate it (excepting the originals, which were programmed at the factory).
  • Page 9: Arming Bypass

    “Arm/ Lock” and “Disarm/Unlock” buttons, which keeps the engine running after removing the ignition key. After exiting, the user must then arm the 850i lock the vehicle doors by pressing the transmitter’s “Arm/Lock” button. Only after this will the system accept a remote start command, and the vehicle must remain undisturbed until that point.
  • Page 10 (Factory Default Setting Minimum) This feature operates in conjunction with the next feature’s “Tachless” setting. The Crime Guard 850i e’s processor is capable of detecting the running engine by two separate methods- the use of the vehicle’s tachometer (“tach”) wire for a direct engine RPM input, or by monitoring the fluctuating voltage levels caused by the starting process.
  • Page 11: System Armed And Activated

    Programming Single or Double Unlock Pulse: Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released twenty five times. The system’s response will be twenty five siren chirps, and the Status Light flashing twenty five times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock"...
  • Page 12: Disarming The System

    • Pressing “Disarm/Unlock” will disarm the system, leaving the doors locked, stopping both system’s alarm condition (leaving it disarmed) and the transceiver’s chirping. • Pressing and releasing any of the three other buttons will simply stop the transceiver’s chirping, but leave the security system still sounding in its alarm state.
  • Page 13 for use with a vehicular horn, when the system has an alarm activation this output pulses .5 second, .5 second off for the duration of the activated alarm period. An optional relay, configured by the installer, is needed to utilize this feature.
  • Page 14 of the normal one chirp and one light flash. Additionally, the Status Light will be flashing a “Zone Violation Code”. When the alarm condition activation occurred, the Status Light changes from flashing slowly to flashing two to four times between pausing to indicate which protected zone was violated. •...
  • Page 15: Disarming By Emergency Override

    the Vehicle Recovery operation from the transmitter or transceiver in the event that you are forced from your car. “Remote Activated” Vehicle Recovery is one three methods of activating this feature, which is explained on page 27. Programming Transmitter Activated Anti Car-Jacking: Follow Steps 1 to 4 on page 28;...
  • Page 16: Enhanced Remote Panic

    Valet Mode (page 23-24), which prevents the system from performing any automatic arming operations which may be otherwise programmed to occur. SecureCode: SecureCode is a user-programmable custom Emergency Override required two stages of valet switch presses. The procedure for Emergency Override with a customized SecureCode is: Step 1 With the system in the armed condition, enter the vehicle via the driver's door (be ready for the system to activate to an alarm condition).
  • Page 17: Auxiliary Outputs

    Status Light flashing ten times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to turn on “Unlock #2 When Ignition Turned Off” (the siren will chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren will chirp twice). Feature #11 Open Door Bypass Of Ignition Locking (Factory Default Setting On)
  • Page 18 To Activate Auxiliary Output #2: Press & Hold for 3 Seconds the “Auxiliary #2 Output” Button ( II ) IF ARMED, THE SYSTEM WILL DISARM, WITH IF THE SYSTEM IS NOT ARMED, 3 SIREN CHIRPS CONFIRMATION IS 1 SIREN CHIRP AND 1 LIGHT Hold 3 AND 1 LIGHT FLASH...
  • Page 19: Silent Arming & Disarming

    Other available options are: piezo shock sensors, and microwave/radar sensors which can detect objects in motion both inside and outside the vehicle. • The Crime Guard 850i which easily allows the addition of a further optional sensor. • If desired, the sensor zone only can be bypassed when the system is armed with the transmitter or Echo transceiver, but leaving the other protection zones in place.
  • Page 20: Remote Sensor Bypass

    The remote engine starting feature should not be used when the vehicle is parked in an enclosed structure or garage! Your Crime Guard 850i e system offers the ultimate in comfort and convenience- remote engine starting. This feature allows the vehicle’s interior to be warmed in the winter or cooled in the summer before you enter the vehicle.
  • Page 21 Feature #1 (Factory Default Setting: 1 Press) “SecureCode” allows the user to customize the number of Valet Switch presses which are required to successfully perform an Emergency Override. The basic Emergency Override procedure is described on page 14. Instead of a single “1 press”...
  • Page 22 Features may be selected and accessed in any order. A convenient Feature Programming Checklist is on pages 46-47, which When the 850i greatly simplifies the feature programming process. Important Note: The following pages explain each of the programmable features in detail.
  • Page 23 • With the engine running, hold the brake pedal and engage the parking brake. When the brake pedal is released, the 850i for 2 minutes, and then automatically turn it off. The vehicle may be se- This feature allows you to turn off the ignition switch,...
  • Page 24: Vehicle Recovery

    cured before this time by arming the system, which will also lock the doors. After 2 minutes the engine will stop running. Turbo Timer can be prevented form engaging, if desired, by turning the engine off first and then engaging the parking brake, or step back on the brake pedal at any time to turn off the engine.
  • Page 25: Stick Shift Remote Starting; Pit-Stop; Turbo Timer Alarm Valet Mode & Starting Valet Modes

    and pause to indicate which protected zone was violated while the system is still armed, after it’s disarmed, and until the vehicle’s ignition is turned on. The system’s Zone Violation memory can store two consecutive zone violations. If there have been multiple violations, the Status Light will replay the two most recent violations in the order in which they occurred.
  • Page 26: Status Indicator Light

    To enter Alarm Valet Mode: With the system disarmed, and without pressing the brake pedal, Press & Hold the Valet Switch for 2 seconds. • The siren will chirp twice, the parking lights will flash twice and the Status Indicator Light will illuminate solid Red, then a series of Green flashes, then return to solid Red.

This manual is also suitable for:

850i4e

Table of Contents