Table of Contents
Advertisement
Advanced Features
Playback
Configuring
Software
for
PC Connection
This camcorder
can transfer still playback
images in TAPE-VCR mode or still images in
TAPE-CAMERA and CARD modes to a
personal computer by using the supplied Video
Capture Software.
System Requirements
• IBM PC/AT or compatible
with Intel ® Pentium ®
133 MHz or faster processor
• Microsoft Windows ® 95B, Windows ® 95C,
Windows ® 98, Windows ® 98 Second Edition,
Windows ® 2000 Professional*,
or Windows ®
Me operating system
• 32 MB or more of RAM
• 9 MB minimum of available
hard-disk space
• SVGA (800 x 600 pixels) color display
monitor with 16-bit color or higher
• CD-ROM drive (for installation)
• RS-232C serial port
• Mouse or other pointing device
* In the Windows ® 2000 Professional
environ-
ment, only the system administrator
has
installation access rights.
Installing
the Software
1
Turn on the PC and start up Windows.
2
Insert the CD-ROM
of the Video Capture
Software
into the CD-ROM
drive.
3
Double click on the "My Computer"
icon.
4
Double click on the "CD-ROM"
drive
icon.
5
Double click on the "Setup.exe"
file.
6
Followthe
instructions
as they appear
on the PC monitor until the installation
is
complete.
Restart the PC.
Connecting the camcorder to a
Personal Computer
1
Turn off the PC.
2
Connect the camcorder
as shown below.
• Before connecting
the camcorder
to the
PC, make sure that the PC power is off
to insure that images are transferred
properly.
PC connecting
cable
(supplied)
=====_
To PC connection jack
3
Turn on the PC.
Notes:
• It is recommended
to use the AC adapter/battery
charger
as a power
source
for extended
periods
of use.
• Images
with the following
functions
cannot
be
transferred
to a personal
computer.
--TAPE-VCR/CARD-VCR
mode:
Playback
Zoom,
Picture
Effect Playback
--TAPE-CAMERA/CARD-CAMERA
mode:
Digital
Zoom, Digital
Picture
Effects,
Scene Menu
• Using
a commercially
available
floppy
disk
adapter
or PC card
adapter,
it is possible
to
directly
transfer
still images
on a SmartMedia
card to a PC (see page
85).
• To edit still images
transferred
with the Video
Capture
Software,
use a commercially
available
image
editing
software.
71
Hide quick links:
Advertisement
Table of Contents
