Using The Camcorder As A Converter - Sharp VIEWCAMZ VL-Z5E Operation Manual

Advanced Features
Playback
Using the Camcorder
as a Converter
Available mode:
Tape Playback
You can use this camcorder to convert from
analog signal (e.g. video recorded on 8 mm
or Hi8 tapes) to digital signal.
Preparation
Connect the audio/video/S-video cable and
DV cable as shown below.
Recording
(digital equipment)
e.g. computer
To DV terminal
DV cable (commercially available)
Digital
signal
To DV terminal
To AV terminal
Analog
signal
Audio/video/S-video cable (supplied)
VIDEO L-AUDIO-R
(MONO)
S-VIDEO
AV-OUT
:
The arrow shows the signal flow.
Note:
• See page 2 for how to open the terminal
cover.
68
Black: To S-video output socket
Yellow: To video output jack
White: To audio output (L) jack
Red: To audio output (R) jack
Playback
(analog equipment)
e.g. 8 mm or Hi8
camcorder
1
Set the camcorder to Tape Playback
mode, and make sure that playback is
stopped.
2
Press the DISPLAY button until the
mode screen appears.
3
Select "MENU", then "EXECUTE" by
using the Operation button (see page
32).
4
Press l or m to select V, then
press the centre of the Operation
button.
5
Press l or m to select
"ANLGyDGTL", then press the centre
of the Operation button.
P L A Y B A C K
R O T A T E P B
A U D I O
A N L G D G T L
R E T U RN
6
Press l or m to select "ON", then
press the centre of the Operation
button.
A N L G D G T L
S E T
O F F
O N
O N