Using The Remote Control (Only Supplied With Vl-Z5) - Sharp VIEWCAMZ VL-Z5E Operation Manual

Useful Features
Useful Features
Playback
Playback
Using the Remote
Control (Only
supplied with VL-Z5)
Available modes:
All modes
Use the remote control to operate the
camcorder from a distance, such as when
you want to record yourself in a scene, or
when the camcorder is connected to a TV
for use as a VCR.
Activating
• The example screens shown are for Tape
Playback mode.
1
Press the DISPLAY button until the
mode screen appears.
2
Press l or m on the Operation
button to select "MENU", then press
the centre of the Operation button.
3
Press l or m to select "EXECUTE",
then press the centre of the Operation
button.
4
Press l or m to select Z, then
press the centre of the Operation
button.
5
Press l or m to select "REMOTE",
then press the centre of the Operation
button.
O T H E R S 1
D E F A U L T
R EMO T E
B E E P
R E T U RN
6
Press l or m to select "ON", then
press the centre of the Operation
button.
REMOT E
7
Press the DISPLAY button to turn off
the menu screen.
46
O N
O F F
ON
Operating
Aim the remote control at the remote sensor
of the camcorder, and press the control
buttons to operate.
SLOW button
TAPE REC START/STOP button
CARD REC button
ZOOM (W/T) buttons
Shift buttons
CARD PLAY/MULTI button
VOLUME +/L buttons
Advance/reverse buttons
Notes:
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as
this may prevent the remote control from
operating properly.
• Be sure that there are no obstacles between
the remote control and the remote sensor.
• The remote control (RRMCGA149WJSA) is
not supplied with VL-Z3. Contact the nearest
SHARP service center or your dealer for
purchasing as specified part.
Remote sensor
PAUSE/STILL
button
STOP button
PLAY button
FF button
REW button
T/C (Time
Code) button
DATE button