Sharp QS-1760H Operation Manual page 7

number entered following
is useful for invoicing.
EXAMPLE: Set A/+- • -A/x to A/x
Set decimal to 2
Enter
Note: Use of the
Addition and subtraction:
The A/x mode functions same as the A/+ mode.
"•" position: Neutral
ITEM COUNT MODE SELECTOR:
"IC±" position: 1) The counter will count the number of times that the
2) When the grand total mode selector is in the ON
3) The memory item counter will count the number of
"IC+" position: 1) The counter will count the number of times that the
, , , , ) key will obey the decimal setting. This
7
3
mode.
key has been pressed in addition.
Note: • Each time the
will be subtracted from the count.
• The count is printed when the calculated
result is obtained.
• Pressing of the
clears the counter.
position (GT), the counter will count the number of
times that the calculation results have been stored in
the grand total memory. To print and clear the count,
press the key.
times that the
Note: • Each time the
subtraction, 1 will be subtracted from the
count.
• The count is printed when the memory is
recalled.
• Pressing of the
or has been pressed in addition and subtraction.
Note: • The count is printed when the calculated
result is obtained.
– 5 –
or key and before
Tape prints
key will automatically override the A/x
key is used in subtraction, 1
, ,
key has been pressed in the addition.
key is used in the
key clears the counter.
(or
7 . ×
0 . 03 =
0 . 21
, or key