Overview; Product Features - Sony CCU-TX7P Operating Instructions Manual

Overview

Overview

Product Features

The CCU-TX7/TX7P is a camera control unit that
connects to DXC-637 Series and DXC-D30 Series
Color Video Cameras via the CA-TX7/TX7P Camera
Adaptor.
This product's features are described below.
Full-featured signal transfer functions
• The CCU-TX7/TX7P is able to transfer wideband
component video signals. (Y signals at 9 MHz or
above, and R–Y and B–Y signals at 4.5 MHz or
above)
• When using a triaxial cable, audio signals can be
transferred up to 750 meters (2461 feet) (when cable
11
diameter is 8.5 mm ( /
32
feet) (when cable diameter is 14.5 mm (
• Transfer functions are provided for the following
signals.
Return video, teleprompter signal, microphone audio,
program audio, red tally and green tally signals
• An intercom switch is also provided.
Flexibly adaptable camera control functions
• The optional COU-TX7 Camera Operation Unit,
which can be installed on the CCU-TX7/TX7P's
front panel, enables video camera operations to be
controlled from the CCU-TX7/TX7P.
• When several CCU-TX7/TX7P units are connected in
parallel, the optional RCP-TX7 Remote Control
Panel can be used to control video camera operations
as well as the color balance between cameras.
• An RS-232C connector is provided for the CCU-
TX7/TX7P, allowing a personal computer to be
connected for computer-based control of video
camera operations.
Wide array of input/output signals
The input and output connectors provided for the
CCU-TX7/TX7P include those for outputting such
signals as a composite video signal (VBS), component
video signals (switchable to RGB), SDI signals, and
video signals for video and waveform monitors, for
inputting a reference signal for external
synchronization.
Rack mountable
Two CCU-TX7/TX7P units can be installed side by
side in the optional RMM-TXC7 Rack Mount Bracket.
4
inch)) or 1,500 meters (4921
19
/ inch)).
32