Specifications - Sony CCU-TX7P Operating Instructions Manual

Specifications

General
Power requirements
CCU-TX7: 120 VAC, 50/60 Hz
CCU-TX7P: 220 to 240 VAC, 50/
60 Hz, 0.45 A
10.5 to 17.0 VDC
Power consumption
95 W
Peak inrush current
(1) Power ON, current probe method:
15 A (240 V)
(2) Hot switching inrush current, measured in
accordance with European standard
EN55103-1: 8 A (230 V)
Cable length 1500 m max. (diameter: 14.5 mm )
Operating temperature
5°C to 40°C (41°F to 104°F)
Mass About 8.45 kg (18 lb 10 oz)
Dimensions (w/h/d, excluding protruding parts)
200 × 164 × 370 mm (7
5
14 /
Input connectors
GENLOCK BNC type (2, loop-through)
VBS/BS, 1.0Vp-p, 75 Ω
RETURN VIDEO 1, 2
BNC type (2 each, loop-through)
VBS, 1.0 Vp-p, 75 Ω
PROMPT VIDEO BNC type (2, loop-through)
VBS, 1.0 Vp-p, 75 Ω
PGM IN XLR 3-pin (1)
Output connectors
VBS1, VBS2 BNC type (1 each)
VBS, 1.0 Vp-p, 75 Ω
1)
Y/R–Y/B–Y BNC type (2 each)
Y: 1.0 Vp-p, 75 Ω
R–Y/B–Y: 700 mVp-p (CCU-
TX7)/525 mVp-p (CCU-TX7P),
75 Ω
R/G/B 1) BNC type (2 each)
700 mVp-p, 75 Ω
BNC type (1), 1.0 Vp-p, 75 Ω
PIX
WF BNC type (1)
700 mVp-p, 75 Ω
Encoded output: 1.0 Vp-p, 75 Ω
..........................................................................................................................................................................................................
1) Y/R–Y/B–Y, R/G/B, and Y/C outputs are switchable.
2) When the optional DXBK-701 is installed.
× 6
7 1
/
8
inches)
8
WF MODE
MIC OUT
1)
Y/C
2)
SDI
SYNC
Camera control input/output connectors
CAMERA
COAX
REMOTE
INTERCOM/TALLY
×
/
2
RTS
RS232C
INTERCOM(on the front panel)
Accessories supplied
AC power cord (1)
Power cord plug retainer (1)
Number plates (1 set)
Operation Manual (1)
Optional accessories
COU-TX7 Camera Operation Unit
DXBK-701 SDI Output Board
RCP-TX7 Remote Control Panel
RMM-TXC7 Rack Mount Bracket
Design and specifications are subject to change
without notice.
4-pin (1)
XLR 3-pin (2)
0 dBu/–20 dBu balanced,
2 channels
BNC type (2 each)
Y: 1.0 Vp-p, 75 Ω
C: 286 mV (CCU-TX7)/300 mV
(CCU-TX7P) (burst), 75 Ω
BNC type (2)
SDI format, 270 Mbps, SMPTE
259M (CCU-TX7)/CCIR656-III
(CCU-TX7P)
BNC type (1)
0.3 Vp-p, 75 Ω, negative polarity
Triaxial (1)
BNC type (1)
10-pin (1)
D-sub 25-pin (1)
4W/2W
TALLY: 24 VDC, TTL level or
contact signals switchable
XLR 3-pin (2)
D-sub 25-pin (2)
XLR 5-pin (1)
21