All manuals and user guides at all-guides.com
coverage area.
Adjust the camera position as needed, and repeat testing until
•
the desired coverage area is achieved.
When you have completed testing the coverage area, there are
•
2 methods to exit the test mode:
a. Open the front housing and press the [TEST] button to exit
test mode. The camera will then enter count down mode
for 1 minute, and the front green indicator will start blinking,
giving you 1 minute to leave the coverage area. The
camera will then enter PIR detection mode.
b. As a safety precaution, the camera will automatically enter
1 minute count down after it has been left sitting idle in test
mode for more than 5 minutes. Camera will then enter PIR
detection mode.
Using the camera in PIR detection mode:
Mount the camera to tree or other sturdy object using either a
•
tree screw (optional accessory) or supplied mounting strap
(You may refer to the mounting suggestions section in this
manual)
www.stealthcam.net
STC-I550
Toll Free 877-269-8490
24