Set Up And Programming - Stealth Cam STS-I550 User Manual

All manuals and user guides at all-guides.com

Set up and Programming

When the camera is first turned on the internal LCD screen
displays the camera status. The following information is present
on this screen.
Flash Mode Control:
The camera is pre-programmed with Auto Flash setting.
Switch the camera to ON position.
•
To turn off the flash mode, press the [UP] button
•
once within 30 seconds.
the top of the screen.
To turn on the flash mode back to Auto setting, press the [UP]
•
button the second time.
screen.
If no buttons are pressed after 30 seconds, the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display
www.stealthcam.net
STC-I550
icon will appear on
icon will appear on the top of the
Toll Free 877-269-8490
15