Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Set up and Programming
When the camera is first turned on the internal LCD screen
displays the camera status. The following information is present
on this screen.
Set Flash Control:
Press [UP] button once to turn off the flash.
o
Press [UP] button again to turn flash to Auto mode.
o
If no buttons are pressed after 30 seconds the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display
screen press and hold the UP or DOWN button for at least 5
seconds.
www.stealthcam.net
STC-I450
Toll Free 877-269-8490
12
Advertisement
Table of Contents
