Advertisement
69
Inside Small Cover
70
Lifter
71
Inside Bucket Rivet Joint Module
72
Heater Fixture B
73
Heater
74
Heater Plate
75
Thermostat 170℃
76
Thermostat Fixture
77
Thermostat 85℃
Attachment
6. Installation
6.1 Unpack all packaging, include the bottom foam, check the machine situation.
6.2 Install the dryer as follow steps:
6.21 Install the Vent Hose
There are two outlets in the dryer ,one is at the back ,the other is in the left side.
Connect the hose to whichever is the more convenient by pulling the ring nut (A)
From the vent outlet at the back ,aligning arrows of the hose and ring nut ,fastening
By screwing hose to the direction of arrow and pushing it firmly back into place .
the unused vent should be sealed with the special snap cover(B).
Name
Quantity
Hose
User Manual
78
Drum As Fixture
79
Drum Shaft
80
Inside Bucket Bearing Module
81
Bearing Supporter B
82
Spring
83
Spring Washer φ8
84
Nut
85
Thermostat Fixture
86
Bracket
1
1
8
Hide quick links:
Advertisement
Need help?
Do you have a question about the AWD80AGP and is the answer not in the manual?
Questions and answers
Can the quick dry setting be used for full load and how much faster will the drying be?
No, the Quick Dry setting on the Whirlpool AWD80AGP cannot be used for a full load. It can only be used with the "Jeans," "Towels," and "Normal" programs and cannot be selected at the same time as the Half Load option. The exact time saved with the Quick Dry setting is not specified.
This answer is automatically generated